You Will Earn 750 points which is the equivalent of £7.50
Zetec 5 Progression Hole Weber 45 DCOE 152 Carburettor Kit
MISAB PLATES AND MOUNTING KIT INCLUDED TOO
Designed To Fit The Ford Zetec Engine And Have An Extra 2 Progression Holes To Eliminate The Flat Spot That Is Evident On The Standard 45 DCOE Fitment.
Both Are Calibrated And Will Need To Be Jetted To Suit A Particular Application, Most Likely A Rolling Road But They Do Have The Weber Standard Jets Fitted.
Weber Specs Are:
45 Dcoe 152
chokes 40mm
aux Venturi 4.5
emulsion Tube F4
main Jet 150
air Jet 155
idle Jet F8/50
pump Jet 45
If You Do Not Have Already A Fuel 'T' Piece And Shaft Syncro Quadrant Then Don't Worry Because These Are Included With Both Carbs
We can also supply ITG filters to match
Please Note That These Carbs Are A Special Order From Webcon Uk And May Take 5 Or 10 Days To Dispatch
WEBER MISAB PLATES AND MOUNTING KIT INCLUDED
4 GENUINE MISAB PLATES
8 RUBBER SPACER BOBBINS AND PLATED STEEL CAPS
MISAB PLATES AND MOUNTING KIT INCLUDED TOO
Designed To Fit The Ford Zetec Engine And Have An Extra 2 Progression Holes To Eliminate The Flat Spot That Is Evident On The Standard 45 DCOE Fitment.
Both Are Calibrated And Will Need To Be Jetted To Suit A Particular Application, Most Likely A Rolling Road But They Do Have The Weber Standard Jets Fitted.
Weber Specs Are:
45 Dcoe 152
chokes 40mm
aux Venturi 4.5
emulsion Tube F4
main Jet 150
air Jet 155
idle Jet F8/50
pump Jet 45
If You Do Not Have Already A Fuel 'T' Piece And Shaft Syncro Quadrant Then Don't Worry Because These Are Included With Both Carbs
We can also supply ITG filters to match
Please Note That These Carbs Are A Special Order From Webcon Uk And May Take 5 Or 10 Days To Dispatch
WEBER MISAB PLATES AND MOUNTING KIT INCLUDED
4 GENUINE MISAB PLATES
8 RUBBER SPACER BOBBINS AND PLATED STEEL CAPS
- Brand: Weber
Write an online review and share your thoughts with other shoppers!
Be the first to review this product