Ford Pinto 1.6 1.8 2.0 OHC Inlet Manifold & Twin Weber 45 DCOE Carburettors | Advanced Automotive
Ford Pinto 1.6 1.8 2.0 OHC Inlet Manifold & Twin Weber 45 DCOE Carburettors | Advanced Automotive
Ford Pinto 1.6 1.8 2.0 OHC Inlet Manifold & Twin Weber 45 DCOE Carburettors | Advanced Automotive
Ford Pinto 1.6 1.8 2.0 OHC Inlet Manifold & Twin Weber 45 DCOE Carburettors | Advanced Automotive
Ford Pinto 1.6 1.8 2.0 OHC Inlet Manifold & Twin Weber 45 DCOE Carburettors | Advanced Automotive
Bookmark and Share

Ford Pinto 1.6 1.8 2.0 OHC Inlet Manifold & Twin Weber 45 DCOE Carburettors

Product Code:
£965.00
You Will Earn 965 points which is the equivalent of £9.65

FORD PINTO 1.6 1.8 2.0 SOHC ENGINES

Performance kit to allow fitment of 2 x Genuine Spanish Weber 45DCOE G carburettors to the Ford 1.6 1.8 & 2.0 OHC Pinto engine.


45 DCOE 152G 4 Progression Hole Version For Smoother Running
Trumpets-- 60mm Length
Chokes--36mm
Aux Venturi--4.5
Emulsion Tube--f16
Main Jet--145
Air Jet--155
Idle Jet--f8/55
Pump Jet--45

Engine Tuning/Jetting Will Be Required In Many Cases But The Above Calibration Is A Good Starting Point

A Classic Appearance Fuel Inlet T Piece, 90 Deg Union And Joining Hose Also Included
A FORD PINTO INLET MANIFOLD WITH WEBER 45 DCOE'S AND CHOICE OF SINGLE OR TWIN CABLE TOP MOUNT LINKAGE KIT

THE KIT WILL FIT ALL PINTO ENGINE TYPES AND IS SELF ASSEMBLY

INLET MANIFOLD IS 95mm MAXIMUM THICKNESS FACE TO FACE
A QUALITY AND WELL MADE CASTING WHICH INCLUDES AS FOLLOWS
4 NYLEX MOUNTING PLATES
8 x O-RINGS
8 PLATED M8 MANIFOLD STUDS
8 PLATED M8 LOCK NUTS
8 STEEL THACKERY WASHERS

PRE-DRILLED SERVO PIPE FEMALE THREAD (1/4 BSP)
PRE-DRILLED WATER/HEATER HOSE TAKEOFF FEMALE THREAD (1/2 BSP)
A CHOICE OF GENUINE WEBER LINKAGE KITS (please choose at checkout)

LP1000 DESIGNED FOR USE WITH YOU EXISTING CABLE AND COMES WITH A BRASS NIPPLE TO FIX TO THE END OF THE CABLE AFTER THE OLD END IS REMOVED
A TOP QUALITY PLATED PRODUCT WITH ALL PARTS NEEDED AND WILL GIVE YEARS OF SERVICE WITHOUT WEARING AS ALL THE CHEAPER TYPES DO ON THE QUADRANT SHAFT

Fits on top to provide a professional and reliable throttle linkage solution

LP1000 is not supplied with a cable and is designed to utilise the cars existing cable
LP2000 is supplied with 2 x throttle cables and associated pedal mounting hardware

Possibly the finest linkage set available for the Weber DCOE.

Designed and manufactured in the UK by Webcon and the market leader for over 15 years.

  • Brand: ADV-Weber
Write an online review and share your thoughts with other shoppers!

Be the first to review this product